                         LYNX USERS GUIDE VERSION 2.3
                                       
   Lynx is a fully-featured World Wide Web (WWW) client for users running
   cursor-addressable, character-cell display devices (e.g., vt100
   terminals, vt100 emulators running on PCs or Macs, or any other
   "curses-oriented" display). It will display hypertext markup language
   (HTML) hypertext documents containing links to files residing on the
   local system, as well as files residing on remote systems running
   Gopher, HTTP, FTP, WAIS, and NNTP servers. Current versions of Lynx
   run on UNIX and VMS. A DOS version is in development.
   
   Lynx can be used to access information on the World Wide Web, or to
   build information systems intended primarily for local access. For
   example, Lynx has been used to build several Campus Wide Information
   Systems (CWIS). In addition, Lynx can be used to build systems
   isolated within a single LAN.
   
   
   
Select a topic

   
     * Viewing local files with Lynx
     * Lynx online help
     * Leaving Lynx
     * Starting Lynx with a Remote File
     * Starting Lynx with the the WWW_HOME environment variable.
     * Navigating hypertext documents with Lynx
     * Printing, Mailing, and Saving files to disk.
     * Lynx searching commands
     * Lynx options menu
     * Comments and mailto: links
     * USENET News posting
     * Lynx and HTML Forms
     * Viewing the HTML document source and editing documents
     * Reloading files and refreshing the display
     * Lynx bookmarks
     * Other useful commands
     * The Lynx command
     * Lynx development history
     * Additional Information
       
Viewing local files with Lynx

   Lynx can be started by entering the Lynx command along with the name
   of a file to display. For example these commands could all be used to
   display an arbitrary ASCII text file.
   
   UNIX
          lynx myfile
          lynx /home/my-dir/myfile
          
   VMS
          lynx dua5:[my-directory]myfile
          
   When executed, Lynx will clear the screen and display as much of the
   specified file as will fit on the screen. Pressing a down-arrow will
   bring up the next screen, and pressing an up-arrow will bring up the
   previous screen. If no file is specified at startup, a default file
   will be displayed. (The default is configured by the system
   administrator when the command is installed.)
   
   Lynx will also display files written in the HyperText Markup Language
   (HTML), if the file's name ends with the characters ".html". HTML is a
   file format that allows users to create a file that contains (among
   other things) hypertext links to other files. Several files linked
   together may be described as a hypertext document.
   
   For example, these commands could be used to display files containing
   HTML hypertext:
   
   UNIX
          lynx myfile.html
          lynx /home/my-dir/myfile.html
          
   VMS
          lynx dua5:[me]myfile.html
          
   When Lynx displays an HTML file, it shows links as "bold face" text,
   except for one link, which is shown as "highlighted" text. Whether
   "boldface" or "highlighted" text shows up as reverse video, boldface
   type, or a color change, etc. depends on the display device being used
   (and the way in which that device has been configured). Lynx has no
   control over the exact presentation of links.
   
   The one link displayed as "highlighted" text is the currently
   "selected" link. Lynx will display the file associated with the
   selected link when a right-arrow or a Return key is pressed. To select
   a particular link, press the up-arrow or down-arrow keys until the
   desired link becomes "highlighted," and then press the right-arrow or
   Return key to view the linked information. Information included in the
   HTML file tells Lynx where to find the linked file and what kind of
   server will provide it (i.e. HTTP, Gopher, etc.).
   
   When a binary file is encountered Lynx will ask the user if he/she
   wishes to download the file or cancel. If the user selects 'D' for
   download, Lynx will transfer the file into a temporary location and
   present the user with a list of options. The only default option is
   "save file to disk", which is disabled if Lynx is running in anonymous
   mode. Any number of additional download methods may be defined in the
   lynx.cfg file by the system administrator. Programs like kermit,
   zmodem and FTP are some possible options. ToC
   
Lynx online help

   Online help is available while viewing any document. Press the '?' or
   'H' key to see a list of help topics. See the section titled
   'Navigating hypertext documents with Lynx' for information on
   navigating through the help files. ToC
   
Leaving Lynx

   To exit Lynx use the 'q' command. You will be asked whether you really
   want to quit. Answering 'y' will exit and 'n' will return you to the
   current document. Use 'Q' or CTRL-D to quit without verification. ToC
   
Starting Lynx with a Remote File

   If you wish to view a remote file (that is, a file residing on some
   computer system other than the one upon which you are running Lynx)
   without first viewing a local file, you must identify that file by
   using a Uniform Resource Locator (URL). URL's take the general form:
   
   PROTOCOL :// HOST / PATH / FILENAME
   
   where
   
   PROTOCOL
          identifies the communications protocol used by the server that
          will provide the file. As mentioned earlier, Lynx (and any WWW
          client) can interact with a variety of servers, each with its
          own protocol.
          
   HOST
          is the Internet address of the computer system on which the
          server is running, and
          
   PATH and FILENAME
          identify the directory path and file of interest.
          
   Here are some sample URL's.
   
   HTTP (HyperText Transfer Protocol)
          http://www.cc.ukans.edu/lynx_help/lynx_help_main.html
          
   Gopher
          gopher://gopher.micro.umn.edu/11/
          
   FTP (File Transfer Protocol)
          ftp://ftp2.cc.ukans.edu/pub/lynx/README
          
   WAIS (Wide Area Information Service protocol)
          wais://cnidr.org/directory-of-servers
          
   A URL may be specified to Lynx on the command line, as in:
   
          lynx http://kufacts.cc.ukans.edu/cwis/start_kufacts.html
          
   ToC
   
Starting Lynx with the the WWW_HOME environment variable.

   You may also specify a starting file for Lynx using the WWW_HOME
   environment variable,
   
   UNIX
          
        ksh
                export WWW_HOME=http://info.cern.ch/default.html
                
        csh
                setenv WWW_HOME http://info.cern.ch/default.html
                
   VMS
          define "WWW_HOME" "http://info.cern.ch/default.html"
          
Navigating hypertext documents with Lynx

   The process of moving within a hypertext web, selecting and displaying
   links is known as "navigation." With Lynx almost all navigation can be
   accomplished with the arrow keys and the numeric keypad.

                                       +-------+-------+-------+
                                       | TOP   |  /|\  | Page  |
              arrow keys               | of    |   |   | UP    |
                                       | text 7|   |  8|      9|
              +---------+              +-------+-------+-------+
              | SELECT  |              |       |       |       |
              | prev /|\|              | <---  |       |  ---> |
              | link  | |              |      4|      5|      6|
    +---------+---------+---------+    +-------+-------+-------+
    |    BACK | SELECT  | DISPLAY |    | END   |   |   | Page  |
    |<-- prev | next  | | sel. -->|    | of    |   |   | DOWN  |
    |    doc. | link \|/| link    |    | text 1|  \|/ 2|      3|
    +---------+---------+---------+    +-------+-------+-------+

   There are also a few other keyboard commands to aid in navigation.
   Some of these commands depend on the fact that Lynx keeps a list of
   each file you visit called the "history list". The "backspace" or
   "delete" key will show you the whole history list. Any of the
   documents shown in the list may be revisited by selecting them from
   the history screen. The 'm' key command will take you back to the
   starting document.
   
    The 'i' key presents an index of documents. The default index is
   usually a document pointing to servers around the world, but the index
   can be changed by the system administrator or on the command line
   using the -index switch, and therefore depends on how the Lynx program
   you are using was configured.
   
   If you choose a link to a server with active access authorization Lynx
   will automatically prompt for a username and a password. If you give
   the correct information, you will then be served the requested
   information. Lynx will automatically send your username and password
   to the same server if it is needed again. ToC
   
Printing, Mailing, and Saving files to disk.

   Documents may be printed using the 'p' command. After pressing the 'p'
   key a menu of Print Options will be displayed. The menu will vary
   according to several factors. First, some sites set up special
   accounts to let users run Lynx to access local information systems.
   Typically these accounts require no passwords and do not require users
   to identify themselves. As a result such accounts are called
   "anonymous" accounts, and their users are considered "anonymous"
   users. In most configurations, all Lynx users (including anonymous
   users) are able to mail files to themselves and print the entire file
   to the screen.
   
   Additional print options are available for users who are using Lynx
   from their own accounts (that is, so-called "non-anonymous users"). In
   particular, the "Save to a local file" option allows you to save the
   document into a file on your disk space. Any number of additional
   print options may also be available as configured by your system
   administrator. ToC
   
Lynx searching commands

   Two commands activate searching in Lynx: "/" and "s". While viewing a
   normal document use the "/" command to find a word or phrase within
   the current document. The search type will depend on the search option
   setting in the options menu (see below). The search options are case
   sensitive and case insensitive. Some documents are designated "index
   documents". These documents can be searched to retrieve additional
   information from an index server. The "s" key allows searching of
   index documents. ToC
   
Lynx options menu

   The Lynx Options Menu may be accessed by pressing the 'o' key. The
   current Lynx Options Menu contains the following configurable options.

                      Options Menu

     E)ditor                    : emacs
     D)ISPLAY variable          : aixtest.cc.ukans.edu:0.0
     B)ookmark file             : home_page
     F)TP sort criteria         : By Filename
     P)ersonal mail address     : montulli@ukanaix.cc.ukans.edu
     S)earching type            : CASE INSENSITIVE
     C)haracter set             : ISO Latin 1
     V)I keys                   : OFF
     e(M)acs keys               : OFF
     K)eypad as arrows
          or Numbered links     : Numbers act as arrows
     U)ser mode                 : Advanced
     L)ocal execution links     : Always off

   An option can be changed by entering the capital letter of the option
   you want to change (i.e. 'E' for Editor). For fields where text must
   be entered, simply enter the text by typing on the keyboard. The
   Backspace and Delete keys can be used to correct mistakes, and CTRL-U
   can be used to erase the whole line. When you are done entering a
   change press the Return key to get back to the Command? prompt.
   
   For fields where you must choose from a list of choices, press any key
   to toggle the choices and press the Return key to finish the change.
   
   When you are done changing options use the 'r' command to return to
   Lynx or the '>' command to save the options to a .lynxrc file and
   return to Lynx.
   
   The following table describes the options available on the Options
   Menu:
   
   Editor
          The editor to be invoked when editing browsable files, and
          sending mail or comments. The full pathname of the editor
          command should be specified when possible.
          
   DISPLAY variable
          This option is only available on UNIX systems and is only
          relevant to X Window users. The DISPLAY variable is picked up
          automatically from the environment if it has been previously
          set.
          
   Bookmark file
          This is the filename and location of your personal bookmark
          file. The bookmark file allows frequently travelled links to be
          stored in a personal easy to access file. Using the 'a' command
          (see below) you may save any link into your bookmark file. If
          the path specified does not begin with a slash then the path
          will reference your home directory.
          
   FTP sort criteria
          This option allows you to specify how files will be sorted
          within FTP listings. The current options include "By Filename",
          "By Size", "By Type", and "By Date".
          
   Personal mail address
          This mail address will be used to help you send files to
          yourself and will be included as the From: address in any mail
          or comments that you send. It will also be sent as the From:
          field in all HTTP get requests.
          
   Searching type
          Searching type has two possible values: CASE INSENSITIVE
          (default) and CASE SENSITIVE. The searching type effects
          inter-document searches only, and determines whether searches
          for words within documents will be done in a case-sensitive or
          case-insensitive manner.
          
   VI keys
          If set to ON then the lowercase h,j,k, and l keys will be
          mapped to left, down, up, and right arrow, respectively.
          
   Emacs keys
          If set to ON then the CTRL-P, CTRL-N, CTRL-F, and CTRL-B keys
          will be mapped to up, down, right, and left arro arrow arroww,
          respectively.
          
   Keypad as arrows or numbered links
          This option gives the choice between navigating with the arrow
          keys or having every link numbered so that the links may be
          selected by numbers as well as using the arrow keys.
          
   User Mode
          There are three possible choices: Novice, Intermediate, and
          Advanced.
          
        Novice
                In Novice mode two lines of help are displayed at the
                bottom of the screen.
                
        Intermediate
                Intermediate mode turns off the help lines.
                
        Advanced
                Advanced mode displays the URL of the currently selected
                link at the bottom of the screen.
                
   Local execution scripts or links
          Local execution can be activated by the system administrator.
          If it has not been activated you will not see this option in
          the options menu. When a local execution script is encountered
          Lynx checks the users options to see whether the script can be
          executed. Users have the following options:
          
        Always off
                Local execution scripts will never be executed
                
        For Local files only
                Local execution scripts will only be executed if the
                script to be executed resides on the local machine, and
                is referenced by a URL that begins with
                "file://localhost"
                
        Always on
                All local exection scripts will be executed
                
   
          If the users options permit the script to be executed Lynx will
          spawn a shell and run the script. If the script cannot be
          executed Lynx will show the script within the Lynx window and
          inform the user that the script is not allowed to be executed
          and will ask the user to check his/her options. ToC
          
Comments and mailto: links

   At any time while viewing documents within Lynx, you may use the 'c'
   command to send a mail message to the owner of the current document if
   the author of the document has specified ownership. If no ownership is
   specified then comments are disabled. Certain links called "mailto:"
   links will also allow you to send mail to other people. Using the mail
   features within Lynx is straightforward.
   
   Once you have decided to send a comment or have selected a "mailto:"
   link a new screen will appear showing you who you are sending the
   message to. Lynx will ask for your name, your e-mail address, and the
   subject of the message. If you have filled in the "personal mail
   address" field in the Options Menu, your e-mail address will be filled
   in automatically. After entering the above information, if you have an
   editor defined in the Options Menu and you are not an anonymous user
   then your specified editor will be spawned for you so that you can
   enter your message. If you do not have an editor defined or you are an
   anonymous user, a simple line mode input scheme will allow you to
   enter your message.
   
   To finish sending the message, exit your spawned editor or, if you are
   using the simple line mode input scheme, type a "." (period) on a line
   by itself. You will be asked a final time whether to send the message.
   If you press 'y' then the message will be sent, if you press 'n' the
   message will be deleted. ToC
   
USENET News posting

   While reading news articles with Lynx you should see a link that says
   "Reply to user@host" and a link that says "Reply to newsgroup(s)"
   
   Reply to user@host
          user@host will actually appear as the mail address of the
          person who posted the news article. Selecting the link will
          allow you to send a message to the person who wrote the message
          you are currently viewing. You will be given the option of
          including the original message in your reply.
          
   Reply to newsgroup(s)
          Selecting this link will allow you to post back to the
          newsgroup that you are currently reading and any newsgroups
          that the message may be cross-posted to. You will be given the
          option of including the original message in your reply. Once
          you have typed in your message the inews program will be called
          to post your message to your news host. ToC
          
Lynx and HTML Forms

   This section describes the Lynx Forms Interface. HTML gives document
   providers the ability to create on-line forms which may be filled out
   when the document is viewed. When a form is submitted the information
   on the form can be used to search a database or complete a survey.
   
   An HTML Form provides for the use of buttons or to perform an action
   (such as submit), checkboxes and radio buttons to select options from
   a list, and fields for entering text.
   
   Buttons:
          Buttons are displayed in the same way that Lynx displays links
          in a document. To "push" the button press the RIGHT ARROW or
          RETURN key.
          
   Checkboxes and Radio buttons
          Checkboxes and radio buttons are displayed as parenthesis: ().
          When a box is checked or a button selected, an asterisk appears
          within the parenthesis: (*). To check a box or select a radio
          button press the RIGHT ARROW or RETURN key.
          
   Text Entry Fields
          Text entry fields are displayed as a row of underscores the
          length of the entry field: _______. You may enter text directly
          by typing at the keyboard. Use the BACKSPACE key to correct
          errors. If you input more text than the field can hold your
          input will be truncated. If you fill a text field the cursor
          will not move off the field but remain at the last field
          position.
          
   You can move around the form using the standard Lynx navigation keys.
   UP ARROW and DOWN ARROW keys respectively select the previous or
   next field, box, or button. The TAB key selects the next field, box,
   or button.
   
   NOTE:If you have a text input field selected you will not have access
   to any of the Lynx keystroke commands. Select a button or box when you
   want to use Lynx keystrokes.
   
Viewing the HTML document source and editing documents

   When viewing HTML documents it is possible to view the unrendered
   (i.e., the original HTML) source of the document by pressing the '\'
   (backslash) key. The document will be reloaded from the server or disk
   and displayed on the screen unrendered. When viewing unrendered
   documents you may print them as any normal document.
   
   Selecting the Print to a local file option from the Print Menu, makes
   it possible to save the source of the document to disk so that you may
   have a local copy of the document.
   
   NOTE: When saving an HTML document it is important to name the
   document with a ".html" extension, if you want to read it with Lynx
   again later.
   
   Lynx can allow users to edit documents that reside on the local
   system. To enable editing, documents must be referenced using a
   "file:" URL or by specifying a plain filename on the command line as
   in the following two examples:
   
          lynx file://localhost/FULL/PATH/FILENAME
          lynx path/filename.html
          
   In addition, the user must also specify an editor in the Options Menu
   so that Lynx knows which editor to use. If the file is specified
   correctly and an editor is defined, then you may edit documents by
   using the 'e' command. When the 'e' command is entered your specified
   editor is spawned to edit the file. After changes are completed, exit
   your editor and you will return to Lynx. Lynx will reload and render
   the file so that changes can be immediately examined. ToC
   
Reloading files and refreshing the display

   The CTRL-R command will reload and rerender the file that you are
   currently viewing. CTRL-L or CTRL-W will refresh or wipe the screen to
   remove or correct any errors that may be caused by operating system or
   other messages. ToC
   
Lynx bookmarks

   It is often useful to place a bookmark to aid in returning quickly to
   a document. To use the bookmark feature you must first use the Options
   Menu to specify a bookmark filename.
   
   To save a bookmark to the document you wish to place in the bookmark
   file press the 'a' key and you will be asked
   
   
          Save D)ocument or L)ink to bookmark file or C)ancel? (d,l,c):
          
   Answer 'd' to save a link to the document you are currently viewing or
   'l' to save the link that is currently selected on the page. Selecting
   'c' will cancel without saveing anything to your bookmark file.
   
   Use the 'v' command to view the list of bookmarks you have saved.
   While viewing the bookmark list you may select a bookmark as you would
   any other link. ToC
   
Other useful commands

   !
          When '!' is pressed your default shell will be spawned. When
          you quit or exit the shell you will return to Lynx. (Usually
          'exit' under UNIX and 'logout' under VMS) This command is
          usually disabled for anonymous users.
          
   g
          The 'g' command allows any URL to be viewed. Pressing the 'g'
          command will bring up a prompt asking for a URL. Type in the
          URL that you wish to view.
          
   =
          The '=' command shows information about the current document
          and the currently selected link if there is one. The number of
          lines in the file, URL, title, owner, and type are shown.
          
   z
          Lynx supports completely interruptable I/O processes. Press the
          'z' key at any time during a connect or transfer process and
          the process will be halted. If any data was transferred before
          the interrupt, it will be displayed. ToC
          
The Lynx command

   The basic syntax of the Lynx command can be represented as one of the
   following:
   
   
          lynx [options]
          lynx [options] pathname
          lynx [options] URL
          
   where
   
   pathname
          is the name of an ASCII text file or an HTML file that enters a
          hypertext network.
          
          + If no file is specified, Lynx will use a default starting
            file and base directory determined during installation.
          + If a specified file is local (i.e., not a URL) Lynx displays
            that file and uses the directory in which that file resides
            as the base directory.
          + If a URL is specified, the file will be retrieved, and only
            the server base directory will be relevant to further
            accesses.
            
   options
          can be selected from the following list, where items in
          all-caps indicate that a substitution must be made.
          
        -anonymous
                used to specify the anonymous account
                
        -case
                enable case-sensitive string searching
                
        -cache=NUMBER
                set the NUMBER of documents cached in memory. The default
                is 10.
                
        -cfg=FILENAME
                specifies a Lynx configuration file other than the
                default lynx.cfg.
                
        -display=DISPLAY
                set the display variable for X rexeced programs
                
        -dump
                dumps the formatted output of the default document or one
                specified on the command line to standard out. Under UNIX
                this can be used in the following way: lynx -dump
                http://info.cern.ch/default.html
                
        -editor=EDITOR
                enable edit mode using the specified EDITOR (vi, ed,
                emacs, etc.)
                
        -emacskeys
                enable emacs-like key movement
                
        -exec
                enable local program execution
                
        -locexec
                enable local program execution from local files only
                
        -noexec
                disable local program execution (default)
                
        -help
                print this Lynx command syntax usage message
                
        -index=URL
                set the default index file to the specified URL
                
        -noprint
                disable print functions
                
        -print
                enable print functions (default)
                
        -restrictions
                allows a list of services to be disabled selectively and
                takes the following form: "lynx -restrictions=[default],
                [all], [inside_telnet], [outside_telnet], [shell],
                [editor], [bookmark], [option_save], [print], [file_url],
                [download], [exec]"
                
              all
                      restricts all options.
                      
              bookmark
                      disallow changing the location of the bookmark
                      file.
                      
              default
                      same as command line option -anonymous. Disables
                      default services for anonymous users. Currently set
                      to all restricted except for: inside_telnet,
                      outside_telnet, and goto. Defaults are setable
                      within userdefs.h.
                      
              download
                      disallow saving binary files to disk in the
                      download menu.
                      
              editor
                      disallow editing.
                      
              exec
                      disable execution scripts.
                      
              file_url
                      disallow using G)oto to go to file: URL's.
                      
              goto
                      disable the 'g' (goto) command.
                      
              inside_telnet
                      disallow telnets for people coming from inside your
                      domain.
                      
              options_save
                      disallow saving options in .lynxrc.
                      
              outside_telnet
                      disallow telnets for people coming from outside
                      your domain.
                      
              print
                      disallow most print options.
                      
              shell
                      disallow shell escapes.
                      
        -show cursor
                If enabled the cursor will not be hidden in the right
                hand corner but will instead be positioned at the start
                of the currently selected link. show cursor is the
                default for systems without FANCY_CURSES capabilities,
                and the default configuration can be changed in
                userdefs.h.
                
        -source
                works the same as dump but outputs HTML source instead of
                formatted text.
                
        -telnet
                disable recognition of embedded telnet commands
                completely.
                
        -term=TERM
                tell Lynx what terminal type to assume its talking to.
                (This may be useful for remote execution, when, for
                example, Lynx connects to a remote TCP/IP port that
                starts a script that, in turn, starts another Lynx
                process.)
                
        -trace
                turns on WWW trace mode
                
        -vikeys
                enable vi-like key movement
                
        -version
                print version information
                
   No options are required, nor is a starting file required. White space
   may be substituted for any equal sign (=) appearing in the option list
   above. ToC
   
Lynx development history

   Lynx grew out of efforts to build a campus-wide information system at
   The University of Kansas. The earliest versions of Lynx provided a
   user-friendly, distributed hypertext interface for users connected to
   multiuser (UN*X and VMS) systems via curses-oriented display devices.
   A custom hypertext format was developed to support hypertext links to
   local files and files on remote Gopher servers. Using Gopher servers
   for distributed file service allowed information providers to publish
   information from a wide variety of platforms (including UN*X, VMS,
   VM/CMS and Macintosh). In addition, Lynx became the most user-friendly
   Gopher client, although that was only an ancillary capability.
   
   This distributed approach let providers retain complete control over
   their information, but it made communication between users and
   providers somewhat more difficult. Following the lead of Neal Erdwien,
   of Kansas State University, the Lynx hypertext format was extended to
   include links for including ownership information with each file. This
   information made it possible for users running Lynx clients to send
   comments and suggestions via e-mail to the providers.
   
   This early version of Lynx was also augmented to support hypertext
   links to programs running on remote systems. It included the ability
   to open a Telnet connection, as well as the ability to start programs
   via rexec, inetd, or by direct socket connects. These capabilities
   were included to allow users to access databases or custom program
   interfaces.
   
   A subsequent version of Lynx incorporated the World Wide Web libraries
   to allow access to the full list of WWW servers, along with the option
   to build hypertext documents in HTML, rather than the native Lynx
   format. HTML has become far more widely used, and the native format is
   being phased out. With the addition of the WWW libraries, Lynx became
   a fully-featured WWW client, limited only by the display capabilites
   offered in the curses environment.
   
   At The University of Kansas, Lynx is used in several different ways to
   give users access to the campus wide information system. First, it is
   run on several local clients from a script named "kufacts" that points
   to the starting file located on a local server. Second, it runs
   whenever a user logs into an account called "kufacts" on a system
   named kufacts.cc.ukans.edu. Users without a local account may use this
   system to explore the KU CWIS and experiment with Lynx.
   
   Lynx was designed by Lou Montulli, Charles Rezac and Michael Grobe of
   Academic Computing Services at The University of Kansas. Lynx was
   implemented by Lou Montulli and is now maintained by Garrett Arch
   Blythe.
   
   Lynx has incorporated code from a variety of sources along the way.
   The earliest versions of Lynx included code from Earl Fogel of
   Computing Services at the University of Saskatchewan, who implemented
   HYPERREZ in the UN*X environment. Those versions also incorporated
   libraries from the UN*X Gopher clients developed at the University of
   Minnesota, and the later versions of Lynx rely on the WWW client
   library code developed by Tim Berners-Lee (and others) and the WWW
   community.
   
   Lynx is presently available via anonymous FTP from ftp2.cc.ukans.edu.
   ToC
   
Additional Information

   For a tutorial introduction to HTML see:
   http://www.ncsa.uiuc.edu/demoweb/html-primer.html.
   For a quick reference guide to HTML see:
   http://kuhttp.cc.ukans.edu/lynx_help/HTML_quick.html

   For reference information on HTML see:
   http://info.cern.ch/hypertext/WWW/MarkUp/MarkUp.html 
   
    Garrett Blythe
    Lou Montulli
    Michael Grobe
    Stephen Ware
    Academic Computing Services
    The University of Kansas
    Lawrence, Kansas 66045
    
   ToC

