TELECOM Digest     Tue, 24 Jan 95 21:43:00 CST    Volume 15 : Issue 62

Inside This Issue:                          Editor: Patrick A. Townson

    Re: Where is PicturePhone II Now? (Ed Ellers)
    Re: Using U.S. Modem in Israel (Rich Galen)
    Re: Wireless CO's Challenge New NPAs? (David E.A. Wilson)
    Re: Ancient Party Lines (David Breneman)
    Re: Voice Response Unit Question (Christian van der Ree)
    Re: Help Locating Telephone/PC Interface Board (Christian van der 
Ree)
    Re: Cellular Phone Information Wanted (John Lundgren)
    Re: Where: T1 Information/FAQ? (John Lundgren)
    Re: Help Needed With Displaying X Windows on the PC (Mike 
MacFaden)
    Re: Chatter Heard on Scanner Leads to Criminal Charges (David 
Hough)
    Re: Telephony Card/Software Needed (Joe Sulmar)
    Re: ANSI Terminal Communications (Timothy D. Shoppa)
    Re: Anyone Have Experience With LDDS/Metromedia? (Justin T. 
Leavens)
    Re: Looking For 900-MHz Cordless Handsfree Headset (Roger Snyder)
    Re: AT&T First to Deliver Long-Awaited "Follow-Me" 500 Numbers 
(jamiec102)
    Re: CID Question (Dave Levenson)
    Re: More CO Codes For Each NPA; Any Telcos Take Advantage? (W. 
Leatherock)
    Five Digit Phone Numbers (Carl Moore)
    Cable Cost-of-Service Regulation (Prakash Hariramani)
    Radio Station Transmission Lines (Daniel Ritsma)

TELECOM Digest is an electronic journal devoted mostly but not
exclusively to telecommunications topics. It is circulated anywhere
there is email, in addition to various telecom forums on a variety of
public service systems and networks including Compuserve and America
On Line. It is also gatewayed to Usenet where it appears as the 
moderated
newsgroup 'comp.dcom.telecom'. 

Subscriptions are available to qualified organizations and individual
readers. Write and tell us how you qualify:

                 * telecom-request@eecs.nwu.edu *

The Digest is edited, published and compilation-copyrighted by Patrick
Townson of Skokie, Illinois USA. You can reach us by postal mail, fax 
or phone at:
                    9457-D Niles Center Road
                     Skokie, IL USA   60076
                       Phone: 708-329-0571
                        Fax: 708-329-0572
  ** Article submission address only: telecom@eecs.nwu.edu **

Our archives are located at lcs.mit.edu and are available by using
anonymous ftp. The archives can also be accessed using our email
information service. For a copy of a helpful file explaining how to
use the information service, just ask.

**********************************************************************
***
*   TELECOM Digest is partially funded by a grant from the              
*
* International Telecommunication Union (ITU) in Geneva, Switzerland    
* 
* under the aegis of its Telecom Information Exchange Services (TIES)   
* 
* project.  Views expressed herein should not be construed as 
represent-*
* ing views of the ITU.                                                 
*
**********************************************************************
***

Additionally, the Digest is funded by gifts from generous readers such
as yourself who provide funding in amounts deemed appropriate. Your 
help 
is important and appreciated. A suggested donation of twenty dollars 
per
year per reader is considered appropriate. See our address above.

All opinions expressed herein are deemed to be those of the author. 
Any
organizations listed are for identification purposes only and messages
should not be considered any official expression by the organization.
----------------------------------------------------------------------

From: Ed Ellers <edellers@delphi.com>
Subject: Re: Where is PicturePhone II Now?
Date: Tue, 24 Jan 95 18:33:55 -0500
Organization: Delphi (info@delphi.com email, 800-695-4005 voice)


David Gingold <gingold@mit.edu> writes:
 
> Can anyone tell me what ever happened to the PicturePhone II phones
> manufactured by AT&T in the '70's?  I have heard a rumor that these
> phones might have been given to Ameritech as part of the breakup, 
but
> I have know idea where to start looking.
 
NYNEX, Bell Atlantic and Ameritech probably have them, if they weren't
sent back to Western Electric to be scrapped -- the service was
offered in New York, Chicago and Pittsburgh, with other cities getting
intercom-only Picturephone service (i.e. you could have it within your
own PBX but not to other sites because the video switches weren't in
place).  The Bell System also had a setup for several years between
top executives at 195 Broadway and the presidents of each of the BOCs,
and some other BOCs obtained sets to be used for demonstrations.


[TELECOM Digest Editor's Note: They were in the lobby of the Illinois
Bell headquarters building in Chicago. Customers could use them by
appointment to hold conferences, etc with people in other cities.  
PAT]

------------------------------

From: rgalen@tad.eds.com (Rich Galen)
Subject: Re: Using U.S. Modem in Israel
Date: Tue, 24 Jan 1995 11:20:58 -0600
Organization: EDS


In article <telecom15.46.16@eecs.nwu.edu>, kass@tacout.army.mil 
(Jeremie
Kass) wrote:

> I am interested in using the modem I use in the U.S. while I am in
> Israel.  Is there any technical and/or legal problem in doing this?
> Also, what kind of telephone jacks are used there?  This will be
> connected to a residential line, so will it be the same RJ-11 jack 
as
> here?

This will NOT be technical because I aren't one, but I have been in
Israel several times over the past few months and have found (1) my US
modem (GV Mercury) works fine back to the US; and (2) sometimes you
find an RJ-11 jack and sometimes you find a jack which is the same
height, but about 4x wider than an RJ-11.  A friend of mine said he
would send me a converter which had the RJ-11 female on one end and
the standard Israeli jack on the male end.


Rich Galen   rgalen@tad.eds.com
EDS Emerging Market Development
Plano, TX          214-605-0017

------------------------------

From: david@cs.uow.edu.au (David E A Wilson)
Subject: Re: Wireless CO's Challenge New NPAs?
Date: 25 Jan 1995 09:35:11 +1100
Organization: University of Wollongong, NSW, Australia.


pritter@nit.AirTouch.COM (Phil Ritter) writes:

> In article <telecom15.47.9@eecs.nwu.edu> Liron Lightwood 
<liron@insane.
> apana.org.au> writes:

>> Here in Australia, we have the best of both worlds.  Our cellular
>> phones have their own area code like prefixes, e.g. 018, 015, 041.
>> However, when making a local call from a cellular phone, you only 
have
>> to dial the six or seven digit number, no area code required.

> While this may be interesting in areas like Australia, where the
> numbering plan areas (or city codes) are large, it breaks down 
quickly
> in the NANP [at least in the dense parts of it].

It even breaks down here in Australia -- we often get calls from
mobile phones which should have gone to the adjacent 044 area code but
end up here in 042.

When the new eight digit numbering plan arrives in 1998 we will only
have four area codes for the entire country the only problems will be
along a couple of state borders.


David Wilson Dept CompSci Uni Wollongong Australia david@cs.uow.edu.au

------------------------------

From: daveb@dgtl.com (David Breneman)
Subject: Re: Ancient Party Lines
Date: 24 Jan 95 23:41:13 GMT
Organization: Digital Systems International, Redmond WA


Scott Falke (scott@csustan.csustan.edu) wrote:

> In article <telecom15.25.2@eecs.nwu.edu> scott@csustan.csustan.edu
> (Scott Falke) writes:

>> In re your story about party-line entertainment:
>> X-Telecom-Digest: Volume 15, Issue 11, Message 2 of 14

>> [TELECOM Digest Editor's Note: The way you describe it was one way
>> of doing the ringing; there were various methods.  What happened on
>> your system if you wanted to call someone on your party line?  

> For 8-party, one dialed 119xy, where x was your line position (1-8)
> and y was the called party (1-8).  The ring generator would 
alternate
> between the two.  When the ring quit, you picked up the handset, 
cause
> they had too.  If the ring didn't quit, you picked up the handset
> anyway.  They weren't home.  If you shared the same relative 
polarity
> with the called party (the gas tubes and tip/ting to gnd) you'd hear
> one long (i.e., yours) and two shorts (theirs) in repetition.  THAT
> was real cool.  Hey, a farming town, you know ...

On our system, you dialed the number of the person you wanted, got a
busy signal, then hung up.  Unless you and the other party shared a
ring (ie, one long vs two short) you heard nothing -- you just had to
wait a while and pick up the receiver and find out if they were there.
Of course, this system could always be used to ring your own phone as
well.  When the Jehovah's Witnesses showed up, an accomplice would
ring the phone, then annouce you had an important call.  Worked every
time. :-)


David Breneman                        Email: 
daveb@jaws.engineering.dgtl.com
Systems Administrator,          Voice: +1 206 881-7544  Fax: +1 206 
556-8033
Product Development Platforms
Digital Systems International, Inc.        Redmond, Washington,  U. S. 
o' A.

------------------------------

From: ttm@xs4all.nl (Christian van der Ree)
Subject: Re: Voice Response Unit Question
Date: Wed, 25 Jan 1995 00:03:17 GMT
Organization: TTM Nederland


> I presently operate a voice/fax response unit using a 486 pc with
> analog phone lines directly connected to a Rhetorex voice board.

> The software and hardware I have is capable of being used with a PBX
> to do call transfers.  I don't have a PBX but I was wondering if I
> could purchase a desktop phone which could be configured so that if 
a
> caller asks for my extension the voice response unit would transfer
> the call to the phone just like a PBX.

> Anybody have any ideas?

What about this workaround that I use:

A caller types in the extension he wish to connect to. If he types in
#110 for instance, the computer beeps one time. I know he wish to 
speak
to me and pick up the phone. If the caller types in #200, the computer
makes two beeps (or plays a  .wav file) I know its for ...

Hopefully you like one. I'm still waiting for some nice payable voice-
hardware that can transform a PC in a real PBX.


TTM Nederland

------------------------------

From: ttm@xs4all.nl (Christian van der Ree)
Subject: Re: Help Locating Telephone/PC Interface Board
Date: Wed, 25 Jan 1995 00:07:53 GMT
Organization: TTM Nederland


> I need to locate an "IBM" PC peripherial board that will let me
> answer the phone, play audio prompts and accept touch tone input 
from
> the caller.  Multiple lines per card and multiple cards per box will
> be better.  Any leads will be greatly appreciated.

If it must be an IBM board, I can't help you. But else I can suggest
some real nice boards that will do the things that you want it to do
and much ... much ... more.


TTM Nederland

------------------------------

From: jlundgre@kn.PacBell.COM (John Lundgren)
Subject: Re: Cellular Phone Information Wanted
Date: 24 Jan 1995 15:12:26 GMT
Organization: Pacific Bell Knowledge Network


LOKESH KALRA (lk05@lehigh.edu) wrote:

> Is there a place other than the January 93 issue of {Consumer 
Reports}
> (probably quite out of date now) that discusses the Cellular/Mobile
> phone technology, kinds of plans offered, and the various models and
> how they are rated? Would appreaciate any info at 
lk05@cs2.cc.lehigh.edu

It seems that the carriers are practically giving the phones away to
get you to sign up with them for a year or so.  Just goes to show
where the profits are.

Rather than worry about the phone technology, it might be wise to
worry about the bills you may be getting.  According to the newsmedia,
the cloning and fraud is rampant.


John Lundgren - Elec Tech - Info Tech Svcs 
Rancho Santiago Community College District 
17th St. at Bristol \ Santa Ana, CA 92706  
jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com

------------------------------

From: jlundgre@kn.PacBell.COM (John Lundgren)
Subject: Re: Where: T1 Information/FAQ?
Date: 25 Jan 1995 00:09:42 GMT
Organization: Pacific Bell Knowledge Network


BRUCE268@DELPHI.COM (BRUCE268@news-feed.delphi.com) wrote:

> Would some one please pass on any sites/addresses where information 
or
> FAQs on T1 service might be found.  Looking for general technical
> overview of the service.  

Probably the best place to look for this is the local telco service
representative.  Maybe for tech info try a good library.


John Lundgren - Elec Tech - Info Tech Svcs
Rancho Santiago Community College District
17th St. at Bristol \ Santa Ana, CA 92706 
jlundgre@pop.rancho.cc.ca.us\jlundgre@kn.pacbell.com

------------------------------

From: mike@premisys.com (Mike MacFaden)
Subject: Re: Help Needed With Displaying X Windows on the PC
Date: 24 Jan 1995 18:44:03 -0800
Organization: Premisys Communications, Inc


In article <telecom15.33.16@eecs.nwu.edu>, Ken Stack 
<stack@me.rochester.
edu> wrote:

> I am trying to fins a way to display x windows on my PC from my Sun 
at
> work.  The problem is that my Sun at work does not have slip or ppp
> for security reasons.  I have attempted to use PSI's interramp 
service

1) You need a SLIP or PPP link from home. If your workstation doesn't
have it, then I suggest your sysAdm install a Terminal Server which
does provide good security (companies: Livingston, Xylogics, Xyplex)

2) Get a copy of an X server that implements Low Bandwidth X (LBX) A
good company to talk to is Network Computing Devices (NCD).

All of these companies are on the net. 


Regards,

Mike MacFaden       Premisys Communications, Inc Fremont CA USA

------------------------------

From: David Hough <dave@sectel.com>
Subject: Re: Chatter Heard on Scanner Leads to Criminal Charges 
Date: Tue, 24 Jan 95 10:33:38  GMT
Organization: Chaotic


In article <telecom15.36.5@eecs.nwu.edu> it was written:

> ECPA as amended is only the latest insult. Previous laws made it 
illegal to 
> intercept certain satellite downlinks (and uplinks), radar speed 
guns,
> and a number of other types of signals. If the trend continues, 
listening to

> any signal not explicitly intended for broadcast will be illegal. I 
know 
> that at least one Congress member proposed legislation with just 
that 
> wording.

In the UK you are only allowed to listen to authorised broadcast 
stations, 
amateur radio stations and transmissions from the Standard Frequency
Service. Even listening to CB is illegal unless you possess a CB
licence.

Dave   djh@sectel.com
Tel +44 1285 655 766    
Fax +44 1285 655 595

------------------------------

From: Joe Sulmar <jsulmar@shore.net>
Subject: Re: Telephony Card/Software Needed
Date: 24 Jan 1995 20:04:40 GMT
Organization: North Shore Access/Eco Software, Inc; (info@shore.net)


> I'm looking for cards for IBM PCs that can handle phone calls ...
> with about four lines but have the ability to upgrade to perhaps 24

The following companies make boards that will meet your needs:

    Dialogic                800-755-4444, 201-993-3030
    Natural Microsystems    800-533-6120, 508-650-1300 (Vikki 
Stoneback)
    Rhetorex                408-370-0881

I also know of some sources of used equipment, but I recommend that
you buy your first board direct, so that you get all of the latest
doc, software and support.  A 4-port board from these companies costs
approximately $1200 (check out the quantity discount break points
before you buy).  All of the above companies offer OS/2 and UNIX


drivers, some of them offer DOS drivers, and NT is either under
development or already available.

Lots of third party companies make application development tools for
these boards.  Let me know if you need information on software.

Good luck.


Joseph J. Sulmar                 jsulmar@shore.net
Computer-Telephony Consultant    voice: 617-862-6358
Lexington, MA                    fax:   617-621-0499

------------------------------

From: shoppa@almach.krl.caltech.edu (Timothy D. Shoppa)
Subject: Re: ANSI Terminal Communications
Date: 24 Jan 1995 10:29:00 PST
Organization: California Institute of Technology


In article <telecom15.47.5@eecs.nwu.edu>, ua291@fim.uni-erlangen.de
(David O. Laney) writes ...

> I am interested in getting the ANSI Terminal Standards (i.e. escape
> sequences) to use to drive a communications package.

Check out the anonymous ftp site cs.ukt.edu; in the directory:
/pub/shuford/terminal

You'll find many files that will be useful, particularly 
"ansi_x3_64.txt".


Tim. (shoppa@altair.krl.caltech.edu)

------------------------------

From: jtleavens@aol.com (JT Leavens)
Subject: Re: Anyone Have Experience With LDDS/Metromedia?
Date: 24 Jan 1995 13:20:16 -0500
Organization: America Online, Inc. (1-800-827-6364)
Reply-To: jtleavens@aol.com (JT Leavens)


I agree with the comment on inbound service from LDDS. I've got an 800
line with them right now, and I am getting comments from customers
about once a week that they can't get through, getting some intercept
message.  Outbound is no problem, but I don't know how long I am going
to keep them for inbound. It's a tough choice though: I've got their
rates at something like 13 cents/min for inbound and outbound calls 
...
($1000/monthly and one year commitment).

------------------------------

From: rsnyder@panix.com (Roger Snyder)
Subject: Re: Looking For 900-MHz Cordless Handsfree Headset
Date: 24 Jan 1995 21:38:25 -0500
Organization: SHAD


Martin Soques (Martin.Soques@amd.com) wrote:

> Greetings!  Subject line says all; I'm looking for a 900-MHz digital
> phone with a cordless headset rather than a cordless handset.

Hello Direct (1-800-444-3556) has a 900MHz cardless headset for $349.


Roger 

------------------------------

From: jamiec1024@aol.com (JamieC1024)
Subject: Re: AT&T First to Deliver Long-Awaited "Follow-Me" 500 
Numbers
Date: 24 Jan 1995 08:50:30 -0500
Organization: America Online, Inc. (1-800-827-6364)
Reply-To: jamiec1024@aol.com (JamieC1024)


It is the owner of the "Follow-Me" card. However this information may 
be
misleading.  AT&T was not the first to deliver long-awaited "Follow-
Me"
Numbers. A case in point:  a company in Michigan called US Signal was 
in 
fact the first to have TRUE "Follow Me" capabilities. The AT&T card is 
really a FIND ME card where it calls a set of preprogramed numbers; 
this 
service can get expensive real fast.


UniDial Communications


[TELECOM Digest Editor's Note: And despite their statements that 500 
numbers
would be available by now, they still are not turned on, at least here 
in 
the Chicago area. I was one of the first people to sign up for 500 
service
when they started taking orders. Despite calling within a day or so of 
their
announcement that orders were being accepted, there were absolutely 
*no*
good numbers available ... already taken, I was told. Yeah, we know 
how 
AT&T does that; trying to get 800 numbers away from them and into the 
hands
of another resporg or carrier got me soured. All these 'reservations' 
and
never once a name to go with them. Well, be that as it may, they told 
me
back in December that my 500 number would take a month to turn on but 
be
available January 20. Comes last Friday, they said it would be Monday 
the
23rd ... now they are saying it will be next week on January 30. As 
usual,
point your finger at someone else; the rep claimed to me that 
Ameritech
does not yet have the billing software in place; that's nonsense 
because
in fact I got billed for my first month of 500 service by AT&T back on
January 24 as part of my Ameritech bill. Watch on January 30 for some 
new
date to be set. Why wouldn't the AT&T reps have known this when they 
took my order now over a month ago?  PAT]

------------------------------

From: dave@westmark.com (Dave Levenson)
Subject: Re: CID Question
Organization: Westmark, Inc.
Date: Mon, 23 Jan 1995 02:37:11 GMT


Stan Schwartz (stanschwartz-aviswizcom@e-mail.com) writes:

> I have recently begun using TotalTel as a secondary LD carrier (by
> signing up for secondary service and a calling card).
 ...
> HOWEVER ... if I dial 10081 + NPA + NXX + XXXX, the call is 
completed
> with CID information provided at the receiving end!  Any ideas on 
what
> they are doing here?

> On their 800 service, TotalTel also seems to translate the ANI of 
the
> calling party and delivers it as CID information on the receiving 
end.

This is just a guess on my part, but this sounds very similar to the
service we get using Cable & Wireless.  Could it be, perhaps, that C&W
and TotalTel are both reselling WillTell service?  WillTell is the
company most often described in this digest as providing Inter-LATA
delivery of ANI via CID, or something like that.


Dave Levenson  Internet: dave@westmark.com
Westmark, Inc.  UUCP: uunet!westmark!dave
Stirling, NJ, USA Voice: 908 647 0900  Fax: 908 647 6857

------------------------------

From: wes.leatherock@oubbs.telecom.uoknor.edu
Date: Tue, 23 Jan 95 21:29:55 
Subject: Re: More CO Codes For Each NPA - Any Telcos Take Advantage?


Quoting dleibold@gvc.com (Dave Leibold):
 
> With the introduction of "interchangeable" area code formats
> officially beginning in a few days, the required dialing changes
> throughout the North American Numbering Plan mean that all area 
codes
> should be able to assign N(0/1)X format prefixes for their local
> numbers.
 
> Are there other area codes where introduction of N(0/1)X
> format CO codes/prefixes is planned?
 
   I first encountered CO codes in this format at least ten years ago
when I was calling a Southern California firm with which my company
was doing business.  (Sorry I don't remember the area code, and it's
probably been changed from what it was then anyway.)
   
   The July 1992 telephone directory for "Greater Fort Worth" has a
list of all prefixes in both the Fort Worth metro calling area (in
area code 817) and the Dallas metro calling area (area code 214).
   
   In 817 these prefixes are listed in the N(0/1)X format:
   
                      410 and 806 
   
   And in the 214 area code:
   
   Southwestern Bell exchanges:
   
   508 703 712 812 704 707 815 202 204 212 215 305 314 502 504
   601 602 603 606 609 616 707 801 802 803 804 805 807 808 906
   908 909 912 913 914 708 709 217 218 515 617 302 309 302 312
   819 407 713 401 402 506 406 919 308 404 419 701 702 715 716
   301 705 801 802 803 907 917 918 902 904 706 503 613 203 319
   819 905 216 
   
   GTE exchanges:
   
   313 413 513 514 518 607 714 717 718 719 915 916 219 304 315
   317 316 318 306 307 416 417 418 403 516 517 519 604 605 608
   612 618 619 205 303 414 
   
   (These were scooped off the maps arranged geographically by wire
centers/zones, so they are not in numerical order and I might have
missed one or two.)
   
   This was two and a half years ago, and there are probably more of
these now.
   
   I know the Houston metropolitan exchange (area code 713) also has a
lot of CO codes in the N(0/1)X format.
   

Wes Leatherock                                            
wes.leatherock@oubbs.telecom.uoknor.edu                       
wes.leatherock@f32.n147.z1.fidonet.org                               

------------------------------

Date: Tue, 24 Jan 95 23:09:10 GMT
From: Carl Moore <cmoore@ARL.MIL>
Subject: Five Digit Phone Numbers


I am originallly from Wilmington, Delaware.  For many years, what
became the {News-Journal} newspapers were on what became 302-654-5351.
(Please don't call that number; it was changed long ago!)  Originally
(and I had to read about this since I am too young to remember that
far back) it would have been printed as "Wilmington 4-5351" or simply
"4-5351" with Wilmington being understood; I believe you had to ask
the operator if you wanted to reach such a number. "Wilmington" was
replaced by "OLympia" (OL for short) when it came time for customers
to be able to dial directly.  Then, in 1966, Diamond State Telephone
stopped printing exchange names in the Wilmington phone book, and
existing numbers of form OLx-xxxx began to be printed as 65x-xxxx.


TELECOM Digest Editor's Note: Until the late 1960's a peculiar thing
existed in Lafayette/West Lafayette, Indiana with Purdue University 
and
the rest of the phones in the town. Lafayette was surrounded by area
code 317, and it had seven digit numbers like everyone else, yet it
was not direct dialable. You could call Indianapolis, or towns on 
either side of it by dialing 317 and the number, but for Lafayette and
West Lafayette you asked your operator for the number. Purdue had
five digit extension numbers, and locally from within town if you knew
the desired extension you could dial 92 plus the five digits. To get 
the Purdue operator from anywhere in town, you just dialed 90. If you
were calling from somewhere like Chicago, you dialed 211 for the long
distance operator and asked for 'Lafayette, Indiana nine-oh' or 
perhaps for nine-two-whatever. Finally about 1970 long after 
everywhere
else in the area was dialable, Lafayette and Fort Wayne (both were
served by GTE, both had seven digit numbers like everyone else) got
connected with everyone else. 

Does anyone remember when all the military bases around the USA had
their own special arrangements?  Camp McCoy in Wisconsin, for example,
was just 'Camp McCoy' to the long distance operator; it had four digit
extensions but no actual 'main listed number'. It was just 'Camp 
McCoy,
extension xxxx' via the long distance operator.  Ditto Fort Benjamin
Harrison in southern Indiana and Great Lakes Naval Base.   PAT]

------------------------------

From: Prakash Hariramani <ph2k+@andrew.cmu.edu>
Subject: Cable Cost-of-Service Regulation
Date: Tue, 24 Jan 1995 18:56:03 -0500
Organization: Info Networking Institute, Carnegie Mellon, Pittsburgh, 
PA


Hi:

I was wondering if any one could tell me the status of cost-of-service
regulation for cable companies by the FCC.  I am specifically
interested in accounting details, i.e. what costs should be considered
and how to calculate cost-of-service.  I searched through the FCC
gopher but did not find anything with this level of detail.


Thanks,

Prakash Hariramani (ph2k@andrew.cmu.edu)
Information Networking Institute
Carnegie Mellon University
5000 Forbes Avenue
Pittsburgh, PA 15213

------------------------------

From: Daniel Ritsma <ritsma@yu1.yu.edu>
Subject: Radio Station Transmission Lines
Date: Mon, 23 Jan 1995 00:23:51 -0500
Organization: Courant Institute of Mathematical Sciences


I am working for a small radio station that is now using two 8kHz
lines to feed four tansmitters (AM).  On one line we feed three
transmitters since they are for buildings next to each other; the 
other
line is for a building some 150 blocks from here.

Should we stick with analog lines or slowly move over to other types
of communication by phone? The fact that we have to branch off led me
to believe that we should go for digital transmition, so that we would
have less noise and a better signal.

Does anybody have experience with this?  We are located in Manhattan
and NYNEX is not of much help. Getting our current two lines to work
properly without too much loos was already a great victory for us.

Our budget is limited as we are a college radio station.  All help is
greatly appreciated.


Sincerely, 

Daniel

------------------------------

End of TELECOM Digest V15 #62
*****************************

                                                       
