TELECOM Digest     Sat, 4 Feb 95 00:48:00 CST    Volume 15 : Issue 78

Inside This Issue:                         Editor: Patrick A. Townson

    How I Fooled Caller ID (John Combs)
    Sprintnet Question (Berton Corson)
    Substitute for BellSouth's Simon (Bob Baxter)
    Most Pressing Problems Facing Network Managers and Planners? (R. 
Jacobson)
    Video Dial Tone Information Wanted (pcohen@cpva.saic.com)
    South American Telecom News Wanted (Steve Samler)
    ANSI,ITU Information Needed (Edgar Murillo Montero)
    Directory Assistance Vendor Wanted (Steve Bauer)
    NYNEX Does it Again ... Not! (Tony Pelliccio)
    Can Anyone Recoomend Excell LD Phone Service? (Chris Telesca)
    Caller ID to TouchTones Help Needed (Lars Nohling)
    Memorex PBX Help Needed (Sergei Fishel)
    RS-422 - How Far at 1KHz? (Dave Dolomond)
    ATT 500 Number Working in PacBell-land Today (John Landwehr)
    OKI 1150 Cell Phone Help Wanted (Timothy F. Cooper)
    Very High Speed Wireless Communication Wanted (Yoji Hasegawa)
    Telstra (Australia) Information Wanted (britos@scf.usc.edu)
    ACD/Call Router Information Needed (T.J. Oconnell)
    Seeking Telecom Library (Dermot Wall)
    Re: Radio Station Transmission Lines (Alan Boritz)
    Re: 7/8ths Heliax Sources Needed (Jack Daniel)
    Re: 7/8ths Heliax Sources Needed (Mark Fletcher)
    Re: Who Are the Telephone Pioneers of America? (bkron@netcom.com)
    Re: Who Are the Telephone Pioneers of America? (John Skalko)

TELECOM Digest is an electronic journal devoted mostly but not
exclusively to telecommunications topics. It is circulated anywhere
there is email, in addition to various telecom forums on a variety of
public service systems and networks including Compuserve and America
On Line. It is also gatewayed to Usenet where it appears as the 
moderated
newsgroup 'comp.dcom.telecom'. 

Subscriptions are available to qualified organizations and individual
readers. Write and tell us how you qualify:

                 * telecom-request@eecs.nwu.edu *

The Digest is edited, published and compilation-copyrighted by Patrick
Townson of Skokie, Illinois USA. You can reach us by postal mail, fax 
or phone at:
                    9457-D Niles Center Road
                     Skokie, IL USA   60076
                       Phone: 708-329-0571
                        Fax: 708-329-0572
  ** Article submission address only: telecom@eecs.nwu.edu **

Our archives are located at lcs.mit.edu and are available by using
anonymous ftp. The archives can also be accessed using our email
information service. For a copy of a helpful file explaining how to
use the information service, just ask.

**********************************************************************
***
*   TELECOM Digest is partially funded by a grant from the              
*
* International Telecommunication Union (ITU) in Geneva, Switzerland    
* 
* under the aegis of its Telecom Information Exchange Services (TIES)   
* 
* project.  Views expressed herein should not be construed as 
represent-*
* ing views of the ITU.                                                 
*
**********************************************************************
***

Additionally, the Digest is funded by gifts from generous readers such
as yourself who provide funding in amounts deemed appropriate. Your 
help 
is important and appreciated. A suggested donation of twenty dollars 
per
year per reader is considered appropriate. See our address above.

All opinions expressed herein are deemed to be those of the author. 
Any
organizations listed are for identification purposes only and messages
should not be considered any official expression by the organization.
----------------------------------------------------------------------

Date: Fri, 3 Feb 95 22:16 EST
From: Testmark Laboratories <0006718446@mcimail.com>
Subject: How I Fooled Caller ID


TELECOM Digest Editor mentioned in a recent TELECOM Digest that he
thought a Caller ID box could be fooled if the Calling Party sent a
burst of their own Bell 202-type modem tones the instant the Called
Party answered.  I decided to try this in our lab, and he's right!
Standalone Caller ID boxes that display calling number, or calling
number and name, "listen" all the time, and any time a valid incoming
Caller ID comes in, they display it!  I checked several brands, and
they all behaved this way.  Someone should alert the telcos and
police, so innocent people won't be accused of prank calls.  I can
already think of several evil plots that could be made in movies of
the week.

However, I also had a couple high-end telephones handy which included
the Caller ID feature, and they wouldn't accept a new Caller ID after
going off-hook.  The reason for this is both phones are ADSI Level 3,
and they comply with the exhaustive Bellcore requirements.  An ADSI
Level 2 or Level 3 telephone that accepted Caller ID after going
off-hook would fail some Bellcore tests.  Unfortunately, an ADSI Level
1 or Level 2 device that wasn't a true telephone, e.g., a standalone
Caller ID box, could still be fooled by an off-hook Caller ID burst,
and the design would pass the Bellcore requirements.

In case you're been muttering, "What the heck is ASDI," I'll give a
brief explanation.  The acronym stands for Analog Display Services
Interface, and it is a new type of telephone designed to work on a
standard, analog telephone line.  (POTS line, Plain Old Telephone
Service) There are three "levels" of ADSI:

     Level 1:  Calling name and number after the first ring.
     Level 2:  Calling name and number with call waiting.
     Level 3:  A telephone with a display screen.  (The "D" in ADSI.)

ADSI Level 3 came about because Bellcore did a study to determine how
to sell more features on a telephone line, such as call waiting, or
call forwarding.  (The RBOCs like to sell these extra features as they
are revenue above the standard line charge, and quite profitable.)
The study concluded that many people didn't buy extra features because
they didn't want to fool with code sequences to enable/disable
features, such as *69.  Bellcore's solution was ADSI.  A Level 3
device has a screen that must be 20 characters across by 6 rows, and
can be 40 characters across by more rows.  There are from four to six
"softkeys."  Menu trees of softkeys can be downloaded to an ADSI
phone, and stored in memory as a "script."  The user gets plain
English displays (or the language of your choice), and can press
softkeys to activate telco features, or even order new ones directly
from the phone!

The REAL attraction of ADSI is that ANYONE can have their own ADSI
server!  After all, it's designed to work on analog lines.  In a
couple of years, a screen phone will be used to call the local video
store, scroll through the new releases, and even reserve one for later
pickup.  Or, perhaps one could call Domino's, order a pizza and
toppings.  Just imagine calling a business, and instead of getting the
tedious voice mail prompts telling you to press *1 to do something,
you get a text screen that lets you scroll though a directory of
employees and select who you want!  The high end ADSI phones that I
have tested even have things like pull-out QWERTY keyboards for data
entry, PCMCIA Type I slots, "smart card" slots, and magnetic strip
card readers!

Bellcore deserves praise for this well thought out service, laid out
in several Bellcore standards.  Another smart move on their part is
that they didn't bother submitting the standard to an international
standards body to try to get it adopted.  (We all know how long that
takes.)  Instead, they have been visiting the PTTs of dozens of
countries, and trying to convince them to sign on to the ADSI standard
as defined by Bellcore.  Several European nations have expressed
interest already, as have Pacific Rim nations, including China.

ADSI is being field-trialed by a few RBOCS right now, including
Ameritech in Chicago.  Ameritech is selling high-end Phillips ADSI
screen phones at cost for only $200 each, and primarily marketing it
for enhanced banking features from your home, along with the ability
to easily order/change custom calling features.

It is estimated that there will be between 5 and 15 million ADSI Level
3 screen phones in North America by 1998, and I suspect the higher
number is more accurate.  Once you've tried one, you don't want to
give it up!  It is my opinion that ADSI, along with V.34 modems giving
true 115 kbps data throughput (via compression), could be an ISDN BRI
"killer" one-two punch.  ISDN is STILL not ubiquitous, the local
telcos don't understand it and don't sell or market it effectively,
and it will NEVER be offered in the boondocks where I live. (Mayo,
Kentucky)

In closing, perhaps the Editor will permit a small plug for my
employer.  TestMark Labs is currently the ONLY alternative to Bellcore
itself, if you want your ADSI product tested for compliance to the
full Bellcore requirements.

By the way, even though ADSI works on POTS lines, it qualifies as
PANS.  (Pretty Amazing New Stuff.)


John Combs, Project Engineer, TestMark Laboratories, 
testmark@mcimail.com


[TELECOM Digest Editor's Note: The thing to remember with Caller-ID is
to look at the display *before* you answer, not afterward! Or if you 
do
go back and review it afterward, do so in a discerning and 
sophisticated
way. Bogus information sent down the line while you are in the process
of going off hook and getting the phone to your ear probably won't 
look
quite the same. For example, the time will probably not be shown, 
since
telco usually sends this. I've never seen a CID box with its own 
clock.
Even if there is a time sent with the bogus information, look to see 
if
it is the same time as the real one. It would be highly unlikely you 
had
two calls in the same 'minute'. Look to see if the one right before 
the
one currently displayed says 'private' ... at the same minute in time
yet!  Keep your eye on the CID display as you take your phone off hook
and bring it to your ear. Notice it suddenly change?  It is hard to 
explain
how or why, but after you have had CID for awhile its like when you 
are on
the phone all day. You *know* what you are supposed to hear next in 
terms
of ringing tones, etc. You'll get with CID to where you *know* what 
you
are supposed to be seeing. Something different pops up and if you have
sort of trained your eye to notice things, you *will* see that 
something
does not look right; you will flip through the entries in the memory
and sort it out. Even if the prankster has the sense to send the time
stamp along, unless he has his clock synchronized with *your* central
office's clock (your office supplies the time, not his) then his bogus
entry may have a time one or two minutes *before* the real one. You 
would
not have an entry in the display which came afterward but with a time
prior to the one before it, and if you do, that's a giveaway.  After
a few calls with CID, you learn what to expect there and how, etc.   
PAT] 

------------------------------

From: Berton Corson <hbgeg066@huey.csun.edu>
Subject: Sprintnet Question
Date: Fri, 3 Feb 95 18:29:45 PST


Patrick:

Got a question.  I'm drawing a blank here.  In using Sprintnet, one
types a 'C' followed by a destination to connect to another system.  I
forgot the destination I use to look up Sprintnet local phone numbers.
I remember both passwords were 'PHONES' but the destination escapes
me.  Do you know???  


Bert


[TELECOM Digest Editor's Note: It seems to me the mystery word is 
'MAIL'.
I think you do 'C MAIL' then the password 'PHONES'. At one time I 
wrote
an article for the net entitled 'Let Your Fingers do the Walking'. It 
was
a long, detailed account of all the interesting connections you could 
get
(at that time) depending on what you entered after the 'C'.  I listed
quite a few test numbers, loop-arounds, manual terminals with 
operators
you could interactively chat with, etc. I listed in one part of my 
article
novelty connections you could make to things like the British Telecom
Master Clock, a master clock in Japan operated by whoever Telenet (the
old name for Sprintnet) gatewayed with over there, etc. I included a
bunch of addresses which connected to outdials of Canada Datapak. I
mentioned some addresses which gatewayed into the old Western Union
telex system and similar. 

Telenet saw the article and stunk up the place something awful. They
took particular umbrage to the fact that I mentioned that the old PC
Pursuit accounts were not blocked out from reaching those 
international
destinations. I also mentioned the numeric addresses for the indials
themselves, and told cryptically how 'some hackers' would call into 
thier
local Telenet indial, do 'C 
address.of.same.indial.in.rotary.hunt.group'
and then sit there on the line *and provide a bogus Telenet prompt* to
some unfortunate sucker who also dialed in, thus capturing the 
password
of some unsuspecting user. In other words, let us say there are ten
lines in a rotary hunt incoming to Telenet (Sprintnet) via ummm ... 
let's
say Chicago-Merrimac office, or Chicago-Irving office. You call in on
line one; do 'C address.of.these.outdials'. Since line one is occupied
naturally -- by you -- your C request would hunt to line two and there
you would sit. Now comes another inbound call and the telco CO parks 
him
on line two, staring you right in the face looking at him. You see him
give those carriage returns to get Telenet's attention, and *you* 
answer
him asking for his password. Like a dummy, he types it right in. You 
say
'sorry, network problems, please disconnect and dial back again.' He
hangs up, you hang up and split. Now you have a password. I kid you 
not.
More PC Pursuit passwords and Telenet network passwords were stolen by
that gimmick than any other scheme. 

Telenet finally wised up and put their incoming lines in one hunt 
group
and their outgoing lines (outdials) in another group with a network
restriction so users could not connect to the incoming lines. If you
try doing 'C a.dialin.somewhere' now the network responds saying the
address you have entered is not in service for incoming connections
(from persons already on the network). I promised them I would not 
again
publish 'Let Your Fingers do the Walking' so that's the way it has to
be. Anyway, try 'C MAIL' with user name PHONES and password PHONES.  
PAT]

------------------------------

Date: Fri, 3 Feb 1995 12:41:07 EST
From: Bob Baxter <bobbles@panix.com>
Subject: Substitute for BellSouth's Simon


My company is looking for a device that is similar to the Simon unit
put out by BellSouth.  Basically, the Simon is a combination cellular
phone, and personal digital assistant rolled into one.  According to
the customer service reps, Simon is the only device of its type.  Is
this correct?

If anyone has other information, or telephone numbers to call for
information, it would be appreciated.


Virtually yours, bobbles@panix.com
Bob Baxter  p00284@psilink.com

------------------------------

From: cyberoid@u.washington.edu (Robert Jacobson)
Subject: Most Pressing Problems Facing Network Managers and Planners?
Date: 3 Feb 1995 19:03:46 GMT
Organization: WORLDESIGN, Seattle


What are the two or three most pressing problems facing you now and in
the near future?  Growth?  Access?  Interface for controls?

For a short report I'm preparing, I'd like to hear from network 
managers 
and planners.  Thanks.  Email is fine.


Bob Jacobson    Worldesign Inc.

------------------------------

From: PCOHEN@CPVA.SAIC.COM
Subject: Video Dial Tone Information Wanted
Date: 3 Feb 95 11:31:21 PST
Organization: Science Applications Int'l Corp./San Diego


I am looking for information on the following topics regarding Video
Dial TOne:

1. FCC grants permission for telephone companies to offer video 
services.

2. FCC begins rulemaking on Telco video programming.

3. 1984 cable communication policy acts restrictions on Telcos 
providing video
programming to subscribers declared unconstitutional.

4. Regional Bell Operating Companies are running trials for video 
dialtone
services.

Please send your responses to my email address (pcohen@cpva.saic.com)


Thank you! 

------------------------------

Date: Fri, 3 Feb 1995 16:29:13 EST
From: Steve Samler <steve@individual.com>
Subject: South American Telecom News Wanted


Does anyone know of any sources for S. American/Central America/Mexico
telecom/datacom news?  Looking for something that might provide three
to five stories per day.

------------------------------

Date: Fri, 3 Feb 1995 11:32:21 GMT
From: Edgar Murillo Montero <emurillo@sol.racsa.co.cr>
Subject: ANSI, ITU Information Needed


I'm looking for SDH, ATM, Frame Relay Recommendations on ANSI, ITU, 
etc. 
Please tell me where can I find these topics.


Ing. Edgar Murillo Montero       Phone:  (506) 287-0446           
Of. Desarrollos Telematicos      Fax:    (506) 257-0514           
Radiografica Costarricense S.A.  E-Mail: emurillo@sol.racsa.co.cr 
P.O. Box 54-1000 San Jose                                         
Costa Rica, Central America                                       

------------------------------

Date: Fri, 3 Feb 1995 16:33:33 CST
From: Steve Bauer <sbauer@tyrell.net>
Subject: Directory Assistance Vendor Wanted


I am looking for a vendor who can provide me with up to date Directory
Assistance data for the United States that can reside on a LAN and be
accessed by any user.  I'm not sure if a CD-ROM that is updated
frequently is the way to go or an on line connection with a per
request charge.

We have about $3,000 per month in Directory Assistance charges.


Thanks,

Steve

------------------------------

From: Tony_Pelliccio@brown.edu (Tony Pelliccio)
Subject: NYNEX Does it Again ... Not!
Date: 3 Feb 1995 15:56:52 GMT
Organization: Brown University -- Providence, Rhode Island  USA




I just saw mention in the {Providence Journal Bulletin} for February
3, 1995 that the Rhode Island Public Utilities Commission has ordered
NYNEX to stop offering Caller-ID services until a problem with
blocking has been rectified.

According to the article the problem exists with customers who've
requested their lines be permanently blocked. The *67 option is still
available and customers who currently have Caller-ID will be able to
retain the service. In a related blurb they state that the same 
problem 
exists in NYNEX's New York offices.

Just another fine example of NYNEX doing what they do best. 


Tony Pelliccio, KD1NR
Box 1908, Prov, RI 02912 Tel. (401) 863-1880 Fax. (401) 863-2269


[TELECOM Digest Editor's Note: Someone else wrote me to say Nynex has
now admitted the problem, (ID was being passed anyway, despite 
blocking)
and is working on getting it fixed. They have offered new non-pub 
phone
numbers at no charge (service/installation) to anyone affected who 
wants
it.    PAT]

------------------------------

From: sascjt@unx.sas.com (Chris Telesca)
Subject: Can Anyone Recommend ExcelL LD Phone Service? 
Date: Fri, 3 Feb 1995 14:49:33 GMT
Organization: SAS Institute Inc.


A friend of mine and her mother are Marketing Reps for Excel LD phone
service.  They say that they can save me a significant amount of money
over AT&T, my current LD carrier.  Their examples are the differences
in charges for one-minute phone calls.  EXCEL has lower flat rates,
while AT&T charges more for the first minute, but they virtually are
identical for longer calls (avg. time: 10 minutes).  EXCEL also 
charges 
a $3.00 flat fee for their service.

Of course, since this is a MLM operation, my friend and her mother
will be collecting commissions on my phone bill.  So it seems that
what I'm really being asked to do is switch over to a service that is
no better (and hopefully no worse) than the one I'm using now, that
may or may not save me money, but will shift some of the money that
used to go to Southern Bell and AT&T over to my friend and her mother.
Not that I have anything against doing that, but does anyone without a
financial stake in EXCEL have any real-life experiences with this 
service?  
Is their any real savings over AT&T?  How does their customer service
deal with billing problems, wrong numbers, unauthorized people using
your calling card number, etc?


Chris Telesca          Associate Photographer          (919)677-8001 
x7489
SAS Institute Inc. / SAS Campus Dr. / Cary, NC  27513 / 
sascjt@unx.sas.com

------------------------------

Date: Fri, 3 Feb 95 10:28 EST
From: Lars Nohling 
<LNohling_+a_BSSI_+lLars_Nohling+r%REMSBSSI@mcimail.com>
Subject: Caller ID to TouchTones


I am looking for a device that will taking the incoming Caller-ID
number and enter it as touch tones to the answering modem before
connecting the incoming call. I want to use it for routing calls based
on the originating location.

Any ideas?

lnohling@mcimail.com    Lars Nohling   Business Systems Solutions, 
inc.

------------------------------

From: fishel@technet.sg
Subject: Memorex PBX Help Needed
Date: Fri, 03 Feb 95 19:00:52 WST
Organization: ATS Technologies (Singapore)


Hi there!

Could you help me with small problem we having here?

We are using Memorex's Telex 1001VS PBX system at office (Phone is
2021L). It is 6 wires. So here are a few questions I'd like to ask:

1. Why is it having 6 wires (Not 4 wires as usual PBX)?
   
2. Is there any 3rd party suppliers who could supply compatible
   hardware and software to this PBX. (Voice mail, OS, PCB...)?

3. Is there network address for Memorex Telex company (www, ftp,...)?


Thank you in advance for any information.

Sergei Fishel

------------------------------

From: dolomond@micronav.ca (Dave Dolomond)
Subject: RS-422 - How Far at 1KHz?
Date: 3 Feb 1995 12:05:16 -0400
Organization: MII


Does anyone have any particular experience with RS-422?

I need to know how far I can transmit a 1KHz signal using an RS-422
link with 24 AWG shielded, twisted pair cable burried underground?
Any help would be appreciated !!!  e-mail if you can...  


Thanks in advance,

Dave D. (dolomond@micronav.ca)

------------------------------

From: John Landwehr <John_Landwehr@NeXT.COM>
Date: Fri, 3 Feb 95 09:45:09 -0800
Subject: ATT 500 Number Working in PacBell-land Today


Just FYI,

ATT activated my 500 number Jan 27.  On Jan 31, PacBell still had no
clue what 500 numbers were.  I called repair and they thought I was an
idiot and actually hung up on me.  I was going to call the PUC today,
but guess what -- my 500 numbers works.


[TELECOM Digest Editor's Note: That's been my experience with 
Ameritech
recently where 500 numbers are concerned. They just assume I am a
crank caller and they humor me. AT&T says agreements were put in place
with all telcos on January 28 and that 500 service is working just 
fine
everywhere and that instead of bothering them further with it I should
contact the Commission. I call the Commission, they say they have no
record of any agreements being reached between AT&T and Ameritech to
unblock 500. Like yourself, thus far I have found no one at Ameritech
who knows anything about 500. Finally yesterday someone at AT&T told 
me
the 'specialist' would look into it, and I had to tell her digit by
digit exactly what number I was dialing and where I was calling from.
The 'specialist' has not called back. Neither has anyone from the 
Illinois
Commerce Commission. I told AT&T the easiest way was to simply 
disconnect
my 500 number and get back to me with it sometime in the future 
if/when
they got their act together.  I can't keep bothering with it.   PAT]

------------------------------

From: cftvgy1@teleport.com (timothy f. cooper)
Subject: OKI 1150 Cell Phone Help Wanted
Date: 4 Feb 1995 00:12:09 GMT
Organization: Teleport - Portland's Public Access (503) 220-1016


I have recently purchased an OKI 1150 cell phone from my neighbor
(moved away) and he gave me all the goodies like batteries, charger,
manual and such. He told me his number was disconnected and I would
need to get my own activation. What he didnt tell me is that he locked
the phone with several security codes! Will I be able to erase this
and start witha fresh phone? wWat are the ports for? (Programming i
know). Can I get the software and cable to do it myself? Who sells
this equipment? Will a dealer be able to reprogram the security codes?

Help!

------------------------------

From: yhase@comm.mpt.go.jp (Yoji Hasegawa)
Subject: Very High Speed Wireless Communication
Organization: Computer Communications Div, MPT
Date: Thu, 2 Feb 1995 10:39:45 GMT


Does anyone know an experiment of very high speed (155Mbps or more?)
communication by wireless measures anywhere in Germany?

Please send any info by e-mail.


Yoji yhase@comm.mpt.go.jp

------------------------------

From: britos@scf.usc.edu
Subject: Telstra (Australia) Information Wanted
Date: Fri, 03 Feb 1995 16:50:08 -0800
Organization: University of Southern California, Los Angeles, CA


Looking for information on this company.  Stock Analysis.  Assets.
Prognosis.  History.  etc ...

------------------------------

From: tjoconnell@aol.com (TJOconnell)
Subject: ACD/Call Router Information Wanted
Date: 3 Feb 1995 20:02:40 -0500
Organization: America Online, Inc. (1-800-827-6364)
Reply-To: tjoconnell@aol.com (TJOconnell)


We are looking for a resource for general information on ACD/Call
Center technology.  This could include an Overview Book on different
systems, emerging technologies, or trends.  Do you have any
information or know of any sources that would help us "figure out"
today's Call Centers?  

Please email: tjoconnell@aol.com


Thanks,

Tom

------------------------------

Date: Thu, 2 Feb 1995 09:19:53 +0000 
From: dermot@nt.com
Subject: Seeking Telecom Library
Reply-To: dermot@ngals022.nt.com
Organization: Northern Telecom, GALWAY, Ireland 


I'd be very grateful if anyone could forward me a phone number and
fax number (non 1-800 please) for Telecom Library, Inc in New York.

Please use the correct email address in the sig. Thanks for the
help.
 
 
Dermot Wall                 Dermot.Wall.dermot@nt.com
Northern Telecom            Phone: +353 91 733 334   
Mervue Industrial Estate    Fax  : +353 91 756 050   
Galway                      ESN  :  570 3334         
Ireland                                              

------------------------------

Subject: Re: Radio Station Transmission Lines
From: drharry!aboritz@uunet.uu.net (Alan Boritz)
Date: Thu, 03 Feb 95 20:32:39 EST
Organization: Harry's Place - Mahwah NJ - +1 201 934 0861


sterger@PrimeNet.Com (Alan Sterger) writes:

>> I am working for a small radio station that is now using two 8kHz
>> lines to feed four tansmitters (AM).  On one line we feed three
>> transmitters since they are for buildings next to each other; the 
other
>> line is for a building some 150 blocks from here.

> Are STLs out of the question?

They are in New York City.  Every allocated channel is occupied,
though in a very inefficient manner.  While it may be possible to free
up at least one wide-band channel by forcing at least one of the
larger FM stations to stop hogging more channels than they really
should ;), the cost to accomplish it, and of real estate for microwave
antennas, and for equipment expense, would make it difficult for even
the largest broadcasters in the country.  New York City is one
peculiar congested place where private (non-switched) circuits can be
cheaper than non-tariff'd alternative services.  It's also probably
the only place in the US that has a *vertical* mileage tariff for some
telco circuits.  <g>

------------------------------

From: jdaniel@netcom.com (Jack Daniel)
Subject: Re: 7/8ths Heliax Sources Needed
Organization: Netcom Online Communications Services (408-241-9760 
login:
guest)
Date: Fri, 3 Feb 1995 13:25:23 GMT


In article <telecom15.73.5@eecs.nwu.edu> md@pstc3.pstc.brown.edu 
(Michael P.
Deignan) writes:

> I need to find 350' of 7/8ths 50ohm heliax for an RF application I'm
> working on. Cheapest I've been able to find is $4.50/ft.  Anyone 
have
> other source suggestions?

Call Trilogy Cable at 1-800-874-5649. Ask for Larry Lindner and 1" low
loss 50 ohm cable. Best buy in the world on NEW high spec cable.

------------------------------

Date: Fri, 3 Feb 1995 06:20:08 -0800
From: mfletch@ix.netcom.com (Mark Fletcher)
Subject: Re: 7/8ths Heliax Sources Needed


In V15 #73 md@pstc3.pstc.brown.edu (Michael P. Deignan) writes:

> I need to find 350' of 7/8ths 50ohm heliax for an RF application I'm
> working on. Cheapest I've been able to find is $4.50/ft.  Anyone 
have
> other source suggestions?

I find the best cable is manufactured by:

Andrew
10500 W. 153rd Street
Orland Park, IL 60462
1-800-255-1479
1-800-349-5444 FAX

Another supplier is:

Times Microwave Systems
PO Bos 5039
Wallingford, CT  06492
800-TMS-COAX or
203-949-8400
203-949-8423 FAX

Either will provide you with a list of distributors in your area.
Also consider subcribing to Mobile Radio Technology (MRT). The
subscription is free for qualified individuals.

MRT
PO BOx 12937
Overland Park, KS 66282-2937


Mark Fletcher

------------------------------

From: bkron@netcom.com (BUBEYE!)
Subject: Re: Who Are the Telephone Pioneers of America?
Organization: NETCOM On-line Communication Services (408 261-4700 
guest)
Date: Fri, 3 Feb 1995 02:02:28 GMT


Jonathan Prince <aa078@seorf.ohiou.edu> writes:

> [What is] the 'Telephone Pioneers of America'?

> [TELECOM Digest Editor's Note: ...  the Telephone Pioneers of 
America
> is an outstanding organization with chapters at telcos all over the 
USA ...

Another interesting fact is that Telephone Pioneers of America is the
largest philanthropic organization in the world.


[TELECOM Digest Editor's Note: I did not know they were the largest;
but their generosity is well known.   PAT]

------------------------------

From: PWWL38A@prodigy.com (John Skalko)
Subject: Re: Who Are the Telephone Pioneers of America?
Date: 4 Feb 1995 01:26:58 GMT
Organization: Prodigy Services Company  1-800-PRODIGY


The length of service restriction has been removed -- at least at
AT&T.  No matter what your service length, you can join in this
volunteer action organization.  And, thanks for your succinct and
lucid explanation of TPA.


JJS


[TELECOM Digest Editor's Note: You and the other Pioneers are quite
welcome. I received some mail from a couple other Pioneers who said
the same thing as yourself regards service length, that there is no
longer a twenty year requirement. Apparently it was for a short time
reduced to seventeen years, now there is no restriction at all. Also I
was corrected on the year of their founding: it was 1911. In that
year, several of the employees of AT&T who had -- even then!  -- been
with the company for twenty years or more -- a few had worked with
Thomas Watson himself -- decided to form a service organization. Their
first projects as an organization were with deaf people, and to this
day hearing impaired people receive much of their time and resources.
Alex Bell was deaf, you know, and a teacher of deaf people.  

Have a nice weekend everyone!  Very cold and snowy here, and the cold
will linger until Monday at least we are told.   PAT]

------------------------------

End of TELECOM Digest V15 #78
*****************************

                                                           
